ANSI/ ASME B16.5 class 600 socket weld flange

ANSI/ASME B16.5 standard covers pressure,temperature,ratings,materials,dimensions,tolerances,marking, testing,and methods of designating openings for pipe flanges and flanged fittings.Socket weld flange dimensions are covered in ANSI/ASME B16.5 class 600 for size NPS ½” to 3″.

ANSI/ AMSE B16.5 class 600 socket weld flange dimensions:

ANSI ASME B16.5 Class 600 Socket Weld Flange Dimensions

ANSI ASME B16.5 Class 600 Socket Weld Flange Dimensions

Pipe Flange Hub Raised Face Drilling Data Weight
Nominal Pipe Size A B C D E K F G H I J
Outside Diameter Overall Diameter Inside Diameter Flange Thickness min Overall Length Socket Diameter Depth of Socket Hub Diameter Face Diameter No. of Holes Bolt Hole Diameter Diameter of Circle of Holes kg/piece
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
½ 0.840 21.30 3.750 95.20 To be specified by the purchaser 0.560 14.20 0.880 22.30 0.880 22.40 0.380 9.600 1.500 38.10 1.380 35.10 4 0.620 15.70 2.620 66.55 0.76
¾ 1.050 26.70 4.620 117.3 0.620 15.70 1.000 25.40 1.090 27.70 0.440 11.10 1.880 47.70 1.690 42.90 4 0.750 19.10 3.250 82.50 1.29
1 1.315 33.40 4.880 123.9 0.690 17.50 1.060 26.90 1.360 34.50 0.500 12.70 2.120 53.80 2.000 50.80 4 0.750 19.10 3.500 88.90 1.55
1.660 42.20 5.250 133.3 0.810 20.60 1.120 28.40 1.700 43.20 0.560 14.20 2.500 63.50 2.500 63.50 4 0.750 19.10 3.880 98.60 2.06
1.900 48.30 6.120 155.4 0.880 22.30 1.250 31.75 1.950 49.50 0.620 15.70 2.750 69.85 2.880 73.15 4 0.880 22.30 4.500 114.3 3.00
2 2.375 60.30 6.500 165.1 1.000 25.40 1.440 36.60 2.440 62.00 0.690 17.50 3.310 84.00 3.620 91.90 8 0.750 19.10 5.000 127.0 3.67
2.875 73.00 7.500 190.5 1.120 28.40 1.620 41.10 2.940 74.70 0.750 19.00 3.940 100.0 4.120 104.6 8 0.880 22.30 5.880 149.3 5.35
3 3.500 88.90 8.250 209.5 1.250 31.75 1.810 46.00 3.570 90.70 0.810 20.60 4.620 117.3 5.000 127.0 8 0.880 22.30 6.620 168.1 7.06

Notes:

  • Class 400 socket weld flanges may be provided in NPS 1/2 to 21/2 using Class 600 dimensions.
  • Dimension B corresponds to the pipe inside diameter. Values quoted assume 40S/Standard wall thickness.
  • Weights are based on manufacturer’s data and are approximate.

Specifications of ANSI/ASME B16.5 flange:

Types of ANSI/ASME B16.5 forged flanges:

ANSI ASME B16.5 weld neck flange drawing

ANSI ASME B16.5 weld neck flange drawing

Weld neck flange(WN flange) is circumferentially welded into the system at its neck which means that the integrity of the butt
welded area can be easily examined by radiography.The bores of both pipe and flange match,which reduces turbulence and erosion inside the pipeline.The weld neck is therefore favoured in critical applications.

ANSI ASME B16.5 blind flange drawing

ANSI ASME B16.5 blind flange drawing

Blind flange is used to blank off pipelines,valves and pumps,it can also be used as an inspection cover.It is sometimes referred to as a blank flange.

ANSI ASME B16.5 slip on flange drawing

ANSI ASME B16.5 slip on flange drawing

Slip on flange(SO flange) is slipped over the pipe and then fillet welded.Slip-on flanges are easy to use in fabricated applications.

ANSI ASME B16.5 lap joint flange drawing

ANSI ASME B16.5 lap joint flange drawing

Lap joint flange(LJ flange) is always used with either a stub end
or taft which is butt welded to the pipe with the flange loose behind it.
This means the stub end or taft always makes the face.The lap joint is favoured in low pressure applications because it is easily assembled and aligned.To reduce cost these flanges can be supplied without a hub and/or in treated,coated carbon steel.

ANSI ASME B16.5 socket weld flange drawing

ANSI ASME B16.5 socket weld flange drawing

Socket weld flange(SW flange) is counter bored to accept the pipe before being fillet welded.The bore of the pipe and flange are both the same therefore giving good flow characteristics.

ANSI ASME B16.5 threaded flange drawing

ANSI ASME B16.5 threaded flange drawing

Threaded flange is referred to as either threaded or screwed.It is used to connect other threaded components in low pressure, non-critical applications.No welding is required.

ANSI ASME B16.5 ring type joint flange drawing

ANSI ASME B16.5 ring type joint flange drawing

Ring type joint is a method of ensuring leak proof flange connection at high pressures.A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal.This jointing method can be employed on weld neck flanges,slip on flange and blind flanges.

Materials of ANSI/ASME B16.5 class 150 socket weld flange:

Carbon steel ANSI/ASME B16.5 socket weld flange:

ASTM A105,A350 LF2,SS400,P235GH,P250GH,C22.8,Q235,20#,16Mn,etc.

Stainless steel ANSI/ASME B16.5 socket weld flange:

ASTM A182 F304,F304L,F316,F316L,F321,F347,F310,F44,F51,etc.

Alloy steel ANSI/ASME B16.5 socket weld flange:

ASTM A694 F42,F46,F52,F56,F60,F65,F70,A182 F5,F9,F91,F12,F11,F22,etc.

Related:

Haihao Group is one of the the biggest flanges manufacturer & supplier & exporter in China,we has strong experience in flange production and inspection and a complete set of equipments,including advanced cutting,forging,machining,drilling machines and professional testing & inspection instruments.If you want to know more about our forged flanges,please email us:sales@haihaogroup.com

PREV
NEXT

RELATED POSTS