ANSI/ASME B16.5 class 400 weld neck flange
ANSI/ASME B16.5 standard covers pressure,temperature,ratings,materials,dimensions,tolerances,marking, testing,and methods of designating openings for pipe flanges and flanged fittings.Weld neck flange dimensions are covered in ANSI/ASME B16.5 for size NPS ½” to 24″ for above NPS 26″ to 60″ it should be as per ANSI/ASME B16.47.
ANSI/ASME B16.5 Class 400 Weld Neck Flange Dimensions:
ANSI ASME B16.5 class 400 weld neck flange
| Pipe | Flange Data | Hub Data | Raised Face | Drilling Data | Weight | |||||||
| Nominal Pipe Size | A | B | C | D | E | F | G | H | I | J | ||
| Outside Diameter | Overall Diameter | Inside Diameter | Flange Thickness min | Overall Length | Diameter at Weld Bevel | Hub Diameter | Face Diameter | Number of Holes | Bolt Hole Diameter | Diameter of Circle of Holes | kg/piece | |
| in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
in mm |
|||
| ½ | 0.840 21.30 | 3.750 95.30 | To be specified by purchaser | 0.560 14.20 | 2.060 52.30 | 0.840 21.30 | 1.500 38.10 | 1.380 35.00 | 4 | 0.620 15.70 | 2.620 66.55 | 0.87 |
| ¾ | 1.050 26.70 | 4.620 117.3 | 0.620 15.70 | 2.250 57.15 | 1.050 26.70 | 1.880 47.80 | 1.690 42.90 | 4 | 0.750 19.10 | 3.250 82.60 | 1.45 | |
| 1 | 1.315 33.40 | 4.880 124.0 | 0.690 17.50 | 2.440 62.00 | 1.320 33.50 | 2.120 53.80 | 2.000 50.80 | 4 | 0.750 19.10 | 3.500 88.90 | 1.76 | |
| 1¼ | 1.660 42.20 | 5.250 133.4 | 0.810 20.60 | 2.620 66.55 | 1.660 42.20 | 2.500 63.50 | 2.500 63.50 | 4 | 0.750 19.10 | 3.880 98.60 | 2.49 | |
| 1½ | 1.900 48.30 | 6.120 155.4 | 0.880 22.40 | 2.750 69.85 | 1.900 48.30 | 2.750 69.85 | 2.880 73.15 | 4 | 0.880 22.40 | 4.500 114.3 | 3.49 | |
| 2 | 2.375 60.30 | 6.500 165.1 | 1.000 25.40 | 2.880 73.15 | 2.380 60.45 | 3.310 84.10 | 3.620 91.90 | 8 | 0.750 19.10 | 5.000 127.0 | 4.36 | |
| 2½ | 2.875 73.00 | 7.500 190.5 | 1.120 28.40 | 3.120 79.25 | 2.880 73.15 | 3.940 100.1 | 4.120 104.6 | 8 | 0.880 22.40 | 5.880 149.4 | 6.43 | |
| 3 | 3.500 88.90 | 8.250 209.6 | 1.250 31.75 | 3.250 82.60 | 3.500 88.90 | 4.620 117.3 | 5.000 127.0 | 8 | 0.880 22.40 | 6.620 168.1 | 8.53 | |
| 3½ | 4.000 101.6 | 9.000 228.6 | 1.380 35.10 | 3.380 85.90 | 4.000 101.6 | 5.250 133.4 | 5.500 139.7 | 8 | 1.000 25.40 | 7.250 184.2 | 10.7 | |
| 4 | 4.500 114.3 | 10.00 254.0 | 1.380 35.10 | 3.500 88.90 | 4.500 114.3 | 5.750 146.1 | 6.190 157.2 | 8 | 1.000 25.40 | 7.880 200.2 | 12.8 | |
| 5 | 5.563 141.3 | 11.00 279.4 | 1.500 38.10 | 4.000 101.6 | 5.560 141.2 | 7.000 177.8 | 7.310 185.7 | 8 | 1.000 25.40 | 9.250 235.0 | 16.9 | |
| 6 | 6.625 168.3 | 12.50 317.5 | 1.620 41.10 | 4.060 103.1 | 6.630 168.4 | 8.120 206.2 | 8.500 215.9 | 12 | 1.000 25.40 | 10.62 269.7 | 22.0 | |
| 8 | 8.625 219.1 | 15.00 381.0 | 1.880 47.80 | 4.620 117.3 | 8.630 219.2 | 10.25 260.4 | 10.62 269.7 | 12 | 1.120 28.40 | 13.00 330.2 | 34.7 | |
| 10 | 10.75 273.0 | 17.50 444.5 | 2.120 53.80 | 4.880 124.0 | 10.75 273.0 | 12.62 320.5 | 12.75 323.8 | 16 | 1.250 31.75 | 15.25 387.4 | 48.5 | |
| 12 | 12.75 323.8 | 20.50 520.7 | 2.250 57.15 | 5.380 136.7 | 12.75 323.8 | 14.75 374.7 | 15.00 381.0 | 16 | 1.380 35.10 | 17.75 450.9 | 69.6 | |
| 14 | 14.00 355.6 | 23.00 584.2 | 2.380 60.45 | 5.880 149.4 | 14.00 355.6 | 16.75 425.5 | 16.25 412.7 | 20 | 1.380 35.10 | 20.25 514.4 | 95.5 | |
| 16 | 16.00 406.4 | 25.50 647.7 | 2.500 63.50 | 6.000 152.4 | 16.00 406.4 | 19.00 482.6 | 18.50 469.9 | 20 | 1.500 38.10 | 22.50 571.5 | 118 | |
| 18 | 18.00 457.2 | 28.00 711.2 | 2.620 66.55 | 6.500 165.1 | 18.00 457.2 | 21.00 533.4 | 21.00 533.4 | 24 | 1.500 38.10 | 24.75 628.7 | 145 | |
| 20 | 20.00 508.0 | 30.50 774.7 | 2.750 69.85 | 6.620 168.1 | 20.00 508.0 | 23.12 587.2 | 23.00 584.2 | 24 | 1.620 41.10 | 27.00 685.8 | 173 | |
| 24 | 24.00 609.6 | 36.00 914.4 | 3.000 76.20 | 6.880 174.8 | 24.00 609.6 | 27.62 701.5 | 27.25 692.1 | 24 | 1.880 47.80 | 32.00 812.8 | 249 | |
Notes:
- Dimension B corresponds to the pipe inside diameter.Values quoted assume 40S/Standard wall thickness.
- Weights are based on manufacturer’s data and are approximate.
Specifications of ANSI/ASME B16.5 flange:
Types of ANSI/ASME B16.5 forged flanges:
 ANSI ASME B16.5 weld neck flange drawing |
Weld neck flange(WN flange) is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography.The bores of both pipe and flange match,which reduces turbulence and erosion inside the pipeline.The weld neck is therefore favoured in critical applications. |
 ANSI ASME B16.5 blind flange drawing |
Blind flange is used to blank off pipelines,valves and pumps,it can also be used as an inspection cover.It is sometimes referred to as a blank flange. |
 ANSI ASME B16.5 slip on flange drawing |
Slip on flange(SO flange) is slipped over the pipe and then fillet welded.Slip-on flanges are easy to use in fabricated applications. |
 ANSI ASME B16.5 lap joint flange drawing |
Lap joint flange(LJ flange) is always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it.This means the stub end or taft always makes the face.The lap joint is favoured in low pressure applications because it is easily assembled and aligned.To reduce cost these flanges can be supplied without a hub and/or in treated,coated carbon steel. |
 ANSI ASME B16.5 socket weld flange drawing |
Socket weld flange(SW flange) is counter bored to accept the pipe before being fillet welded.The bore of the pipe and flange are both the same therefore giving good flow characteristics. |
 ANSI ASME B16.5 threaded flange drawing |
Threaded flange is referred to as either threaded or screwed.It is used to connect other threaded components in low pressure, non-critical applications.No welding is required. |
 ANSI ASME B16.5 ring type joint flange drawing |
Ring type joint is a method of ensuring leak proof flange connection at high pressures.A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal.This jointing method can be employed on weld neck flanges,slip on flange and blind flanges. |
Materials of ANSI/ASME B16.5 class 400 weld neck flange:
Carbon steel ANSI/ASME B16.5 weld neck flange:
ASTM A105,A350 LF2,SS400,P235GH,P250GH,C22.8,Q235,20#,16Mn,etc.
Stainless steel ANSI/ASME B16.5 weld neck flange:
ASTM A182 F304,F304L,F316,F316L,F321,F347,F310,F44,F51,etc.
Alloy steel ANSI/ASME B16.5 weld neck flange:
ASTM A694 F42,F46,F52,F56,F60,F65,F70,A182 F5,F9,F91,F12,F11,F22,etc.
Related:
- ANSI/ASME B16.5 class 150 weld neck flange
- ANSI/ASME B16.5 class 300 weld neck flange
- ANSI/ASME B16.5 class 400 weld neck flange
- ANSI/ASME B16.5 class 600 weld neck flange
- ANSI/ASME B16.5 class 900 weld neck flange
- ANSI/ASME B16.5 class 1500 weld neck flange
- ANSI/ASME B16.5 class 2500 weld neck flange
Haihao Group is one of the the biggest flanges manufacturer & supplier & exporter in China,we has strong experience in flange production and inspection and a complete set of equipment,including advanced cutting,forging,machining,drilling machines and professional testing & inspection instruments.If you want to know more about our forged flanges,please email us:sales@haihaogroup.com
