ANSI/ASME B16.5 class 150 slip on flange
Slip on flange(SO flange) is slipped over the pipe and then fillet welded.Slip-on flanges are easy to use in fabricated applications.ANSI/ASME B16.5 standard covers pressure,temperature,ratings,materials,dimensions, tolerances,marking,testing,and methods of designating openings for pipe flanges and flanged fittings.Slip on flange dimensions are covered in ANSI/ASME B16.5 class 150 for size NPS ½” to 24″.
ANSI/ASME B16.5 Class 150lb Slip On Flange Diamentions:
ANSI ASME B16.5 Class 150lb Slip On Flange Dimensions
| Pipe | Flange Data | Hub | Raised Face | Drilling Data | Weight | ||||||
| Nominal Pipe Size | A | B | C | D | F | G | H | I | J | ||
| Outside Diameter | Overall Diameter | Inside Diameter | Flange Thickness min |
Overall Length | Hub Diameter | Face Diameter | Number of Holes | Bolt Hole Diameter | Diameter of Circle of Holes | kg/piece | |
| in | in | in | in | in | in | in | in | in | |||
| mm | mm | mm | mm | mm | mm | mm | mm | mm | |||
| ½ | 0.840 21.30 |
3.500 88.90 | 0.880 22.40 | 0.440 11.20 |
0.620 15.70 | 1.190 30.20 | 1.380 35.10 | 4 | 0.620 15.70 | 2.380 60.45 | 0.39 |
| ¾ | 1.050 26.70 |
3.880 98.60 | 1.090 27.70 | 0.500 12.70 |
0.620 15.70 | 1.500 38.10 | 1.690 42.90 | 4 | 0.620 15.70 | 2.750 69.85 | 0.56 |
| 1 | 1.315 33.40 |
4.250 108.0 | 1.360 34.50 | 0.560 14.20 |
0.690 17.50 | 1.940 49.30 | 2.000 50.80 | 4 | 0.620 15.70 | 3.120 79.25 | 0.78 |
| 1 ¼ | 1.660 42.20 |
4.620 117.3 | 1.700 43.20 | 0.620 15.70 |
0.810 20.60 | 2.310 58.70 | 2.500 63.50 | 4 | 0.620 15.70 | 3.500 88.90 | 1.03 |
| 1 ½ | 1.900 48.30 |
5.000 127.0 | 1.950 49.50 | 0.690 17.50 |
0.880 22.40 | 2.560 65.00 | 2.880 73.15 | 4 | 0.620 15.70 | 3.880 98.60 | 1.32 |
| 2 | 2.375 60.30 |
6.000 152.4 | 2.440 62.00 | 0.750 19.10 |
1.000 25.40 | 3.060 77.70 | 3.620 91.90 | 4 | 0.750 19.10 | 4.750 120.7 | 2.06 |
| 2 ½ | 2.875 73.00 |
7.000 177.8 | 2.940 74.70 | 0.880 22.40 |
1.120 28.40 | 3.560 90.40 | 4.120 104.6 | 4 | 0.750 19.10 | 5.500 139.7 | 3.28 |
| 3 | 3.500 88.90 |
7.500 190.5 | 3.570 90.70 | 0.940 23.90 |
1.190 30.20 | 4.250 108.0 | 5.000 127.0 | 4 | 0.750 19.10 | 6.000 152.4 | 3.85 |
| 3 ½ | 4.000 101.6 |
8.500 215.9 | 4.070 103.4 | 0.940 23.90 |
1.250 31.75 | 4.810 122.2 | 5.500 139.7 | 8 | 0.750 19.10 | 7.000 177.8 | 4.81 |
| 4 | 4.500 114.3 |
9.000 228.6 | 4.570 116.1 | 0.940 23.90 |
1.310 33.30 | 5.310 134.9 | 6.190 157.2 | 8 | 0.750 19.10 | 7.500 190.5 | 5.30 |
| 5 | 5.563 141.3 |
10.00 254.0 | 5.660 143.8 | 0.940 23.90 |
1.440 36.60 | 6.440 163.6 | 7.310 185.7 | 8 | 0.880 22.40 | 8.500 215.9 | 6.07 |
| 6 | 6.625 168.3 |
11.00 279.4 | 6.720 170.7 | 1.000 25.40 |
1.560 39.60 | 7.560 192.0 | 8.500 215.9 | 8 | 0.880 22.40 | 9.500 241.3 | 7.45 |
| 8 | 8.625 219.1 |
13.50 342.9 | 8.720 221.5 | 1.120 28.40 |
1.750 44.50 | 9.690 246.1 | 10.62 269.7 | 8 | 0.880 22.40 | 11.75 298.5 | 12.1 |
| 10 | 10.75 273.0 |
16.00 406.4 | 10.88 276.3 | 1.190 30.20 |
1.940 49.30 | 12.00 304.8 | 12.75 323.9 | 12 | 1.000 25.40 | 14.25 362.0 | 16.5 |
| 12 | 12.75 323.8 |
19.00 482.6 | 12.88 327.1 | 1.250 31.75 |
2.190 55.60 | 14.38 365.3 | 15.00 381.0 | 12 | 1.000 25.40 | 17.00 431.8 | 26.2 |
| 14 | 14.00 355.6 |
21.00 533.4 | 14.14 359.1 | 1.380 35.10 |
2.250 57.15 | 15.75 400.1 | 16.25 412.8 | 12 | 1.120 28.40 | 18.75 476.3 | 34.6 |
| 16 | 16.00 406.4 |
23.50 596.9 | 16.16 410.5 | 1.440 36.60 |
2.500 63.50 | 18.00 457.2 | 18.50 469.9 | 16 | 1.120 28.40 | 21.25 539.8 | 44.8 |
| 18 | 18.00 457.2 |
25.00 635.0 | 18.18 461.8 | 1.560 39.60 |
2.690 68.30 | 19.88 505.0 | 21.00 533.4 | 16 | 1.250 31.75 | 22.75 577.9 | 48.9 |
| 20 | 20.00 508.0 |
27.50 698.5 | 20.20 513.1 | 1.690 42.90 |
2.880 73.15 | 22.00 558.8 | 23.00 584.2 | 20 | 1.250 31.75 | 25.00 635.0 | 61.9 |
| 24 | 24.00 609.6 |
32.00 812.8 | 24.25 616.0 | 1.880 47.80 |
3.250 82.60 | 26.12 663.4 | 27.25 692.2 | 20 | 1.380 35.10 | 29.50 749.3 | 86.9 |
Notes:
- Weights are based on manufacturer’s data and are approximate.:
- Flat face flanges may be provided at full thickness,C,or with raised face removed (the latter is nonstandard).
Specifications of ANSI/ASME B16.5 forged flange:
Types of ANSI/ASME B16.5 forged flanges:
 ANSI ASME B16.5 weld neck flange drawing |
Weld neck flange(WN flange) is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography.The bores of both pipe and flange match,which reduces turbulence and erosion inside the pipeline.The weld neck is therefore favoured in critical applications. |
 ANSI ASME B16.5 blind flange drawing |
Blind flange is used to blank off pipelines,valves and pumps,it can also be used as an inspection cover.It is sometimes referred to as a blank flange. |
 ANSI ASME B16.5 slip on flange drawing |
Slip on flange(SO flange) is slipped over the pipe and then fillet welded.Slip-on flanges are easy to use in fabricated applications. |
 ANSI ASME B16.5 lap joint flange drawing |
Lap joint flange(LJ flange) is always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it.This means the stub end or taft always makes the face.The lap joint is favoured in low pressure applications because it is easily assembled and aligned.To reduce cost these flanges can be supplied without a hub and/or in treated,coated carbon steel. |
 ANSI ASME B16.5 socket weld flange drawing |
Socket weld flange(SW flange) is counter bored to accept the pipe before being fillet welded.The bore of the pipe and flange are both the same therefore giving good flow characteristics. |
 ANSI ASME B16.5 threaded flange drawing |
Threaded flange is referred to as either threaded or screwed.It is used to connect other threaded components in low pressure, non-critical applications.No welding is required. |
 ANSI ASME B16.5 ring type joint flange drawing |
Ring type joint is a method of ensuring leak proof flange connection at high pressures.A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal.This jointing method can be employed on weld neck flanges,slip on flange and blind flanges. |
Materials of ANSI/ASME B16.5 class 150 slip on flange:
Carbon steel ANSI/ASME B16.5 slip on flange:
ASTM A105,A350 LF2,SS400,P235GH,P250GH,C22.8,Q235,20#,16Mn,etc.
Stainless steel ANSI/ASME B16.5 slip on flange:
ASTM A182 F304,F304L,F316,F316L,F321,F347,F310,F44,F51,etc.
Alloy steel ANSI/ASME B16.5 slip on flange:
ASTM A694 F42,F46,F52,F56,F60,F65,F70,A182 F5,F9,F91,F12,F11,F22,etc.
Related:
- ANSI/ASME B16.5 class 150 slip on flange
- ANSI/ASME B16.5 class 300 slip on flange
- ANSI/ASME B16.5 class 400 slip on flange
- ANSI/ASME B16.5 class 600 slip on flange
- ANSI/ASME B16.5 class 900 slip on flange
- ANSI/ASME B16.5 class 1500 slip on flange
Haihao Group is one of the the biggest flanges manufacturer & supplier & exporter in China,we has strong experience in forged flange production and inspection and a complete set of equipments,including advanced cutting,forging,machining,drilling machines and professional testing & inspection instrurments.If you want to know more about our forged flanges,please email us:sales@haihaogroup.com
