ANSI /ASME B16.5 class 400 blind flange
Blind flange is used to blank off pipelines,valves and pumps,it can also be used as an inspection cover.It is sometimes referred to as a blank flange.ANSI/ASME B16.5 standard covers pressure,temperature,ratings, materials,dimensions,tolerances,marking,testing,and methods of designating openings for pipe flanges and flanged fittings.Blind flange dimensions are covered in ANSI/ASME B16.5 for size NPS ½” to 24″.
ANSI/ ASME B16.5 Class 400 Blind Flange Dimensions
Nominal Pipe Size | Pipe | Flange Data | Raised Face | Drilling Data | Weight | |||
A | C | G | H | I | J | |||
Outside Diameter | Overall Diameter | Flange Thickness min | Face Diameter | Number of Holes | Bolt Hole Diameter | Diameter of Circle of Holes | kg/piece | |
in mm | in mm | in mm | in mm | in mm | in mm | |||
½ | 0.840 21.30 | 3.750 95.20 | 0.560 14.20 | 1.380 35.10 | 4 | 0.620 15.70 | 2.620 66.55 | 0.76 |
¾ | 1.050 26.70 | 4.620 117.3 | 0.620 15.70 | 1.690 42.90 | 4 | 0.750 19.10 | 3.250 82.60 | 1.28 |
1 | 1.315 33.40 | 4.880 123.9 | 0.690 17.50 | 2.000 50.80 | 4 | 0.750 19.10 | 3.500 88.90 | 1.60 |
1¼ | 1.660 42.20 | 5.250 133.3 | 0.810 20.60 | 2.500 63.50 | 4 | 0.750 19.10 | 3.880 98.60 | 2.23 |
1½ | 1.900 48.30 | 6.120 155.4 | 0.880 22.30 | 2.880 73.15 | 4 | 0.880 22.40 | 4.500 114.3 | 3.25 |
2 | 2.375 60.30 | 6.500 165.1 | 1.000 25.40 | 3.620 91.90 | 8 | 0.750 19.10 | 5.000 127.0 | 4.15 |
2½ | 2.875 73.00 | 7.500 190.5 | 1.120 28.40 | 4.120 104.6 | 8 | 0.880 22.40 | 5.880 149.4 | 6.13 |
3 | 3.500 88.90 | 8.250 209.5 | 1.250 31.70 | 5.000 127.0 | 8 | 0.880 22.40 | 6.620 168.1 | 8.44 |
3½ | 4.000 101.6 | 9.000 228.6 | 1.380 35.00 | 5.500 139.7 | 8 | 1.000 25.40 | 7.250 184.2 | 11.0 |
4 | 4.500 114.3 | 10.00 254.0 | 1.380 35.10 | 6.190 157.2 | 8 | 1.000 25.40 | 7.880 200.2 | 13.7 |
5 | 5.563 141.3 | 11.00 279.4 | 1.500 38.10 | 7.310 185.7 | 8 | 1.000 25.40 | 9.250 235.0 | 18.5 |
6 | 6.625 168.3 | 12.50 317.5 | 1.620 41.10 | 8.500 215.9 | 12 | 1.000 25.40 | 10.62 269.7 | 25.5 |
8 | 8.625 219.1 | 15.00 381.0 | 1.880 47.80 | 10.62 269.7 | 12 | 1.120 28.40 | 13.00 330.2 | 42.6 |
10 | 10.75 273.0 | 17.50 444.5 | 2.120 53.80 | 12.75 323.9 | 16 | 1.250 31.75 | 15.25 387.4 | 64.5 |
12 | 12.75 323.8 | 20.50 520.7 | 2.250 57.15 | 15.00 381.0 | 16 | 1.380 35.10 | 17.75 450.9 | 94.30 |
14 | 14.00 355.6 | 23.00 584.2 | 2.380 60.45 | 16.25 412.8 | 20 | 1.380 35.10 | 20.25 514.4 | 124 |
16 | 16.00 406.4 | 25.50 647.7 | 2.500 63.50 | 18.50 469.9 | 20 | 1.500 38.10 | 22.50 571.5 | 162 |
18 | 18.00 457.2 | 28.00 711.2 | 2.620 66.55 | 21.00 533.4 | 24 | 1.500 38.10 | 24.75 628.7 | 205 |
20 | 20.00 508.0 | 30.50 774.7 | 2.750 69.85 | 23.00 584.2 | 24 | 1.620 41.10 | 27.00 685.8 | 254 |
24 | 24.00 609.6 | 36.00 914.4 | 3.000 76.20 | 27.25 692.2 | 24 | 1.880 47.80 | 32.00 812.8 | 386 |
Notes:
- Weights are based on manufacturer’s data and are approximate.
Specifications of ANSI/ASME B16.5 flange:
Types of ANSI/ASME B16.5 forged flanges:
Weld neck flange(WN flange) is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography.The bores of both pipe and flange match,which reduces turbulence and erosion inside the pipeline.The weld neck is therefore favoured in critical applications. |
|
Blind flange is used to blank off pipelines,valves and pumps,it can also be used as an inspection cover.It is sometimes referred to as a blank flange. | |
Slip on flange(SO flange) is slipped over the pipe and then fillet welded.Slip-on flanges are easy to use in fabricated applications. | |
Lap joint flange(LJ flange) is always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it.This means the stub end or taft always makes the face.The lap joint is favoured in low pressure applications because it is easily assembled and aligned.To reduce cost these flanges can be supplied without a hub and/or in treated,coated carbon steel. |
|
Socket weld flange(SW flange) is counter bored to accept the pipe before being fillet welded.The bore of the pipe and flange are both the same therefore giving good flow characteristics. | |
Threaded flange is referred to as either threaded or screwed.It is used to connect other threaded components in low pressure, non-critical applications.No welding is required. | |
Ring type joint is a method of ensuring leak proof flange connection at high pressures.A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal.This jointing method can be employed on weld neck flanges,slip on flange and blind flanges. |
Materials of ANSI/ASME B16.5 class 150 blind flange:
Carbon steel ANSI/ASME B16.5 blind flange:
ASTM A105,A350 LF2,SS400,P235GH,P250GH,C22.8,Q235,20#,16Mn,etc.
Stainless steel ANSI/ASME B16.5 blind flange:
ASTM A182 F304,F304L,F316,F316L,F321,F347,F310,F44,F51,etc.
Alloy steel ANSI/ASME B16.5 blind flange:
ASTM A694 F42,F46,F52,F56,F60,F65,F70,A182 F5,F9,F91,F12,F11,F22,etc.
Related:
- ANSI/ASME B16.5 class 150 blind flange
- ANSI/ASME B16.5 class 300 blind flange
- ANSI/ASME B16.5 class 400 blind flange
- ANSI/ASME B16.5 class 600 blind flange
- ANSI/ASME B16.5 class 900 blind flange
- ANSI/ASME B16.5 class 1500 blind flange
- ANSI/ASME B16.5 class 2500 blind flange
Haihao Group is one of the the biggest flanges manufacturer & supplier & exporter in China,we has strong experience in flange production and inspection and a complete set of equipments,including advanced cutting,forging,machining,drilling machines and professional testing & inspection instrurments.If you want to know more about our forged flanges,please email us:sales@haihaogroup.com