API 6A standard blind flange with three coats of paint coating order follow up
Introduction to blind flange with three coats of paint-the customer is satisfied with the additional order of the last product.
I didn’t know if you had any impression on the three-layer painted API 6A 6BX blind flange we provided to customers last time. This time, we ushered in a follow-up. Customers were very satisfied with the coated flange products we provided last time. And signed a new order with us. It’s more difficult this time. The list is as follows.
Item | Description | QTY |
1 | 1 13/16 ” FLANGE BLIND RTJ TYPE, made with 25mm Thick plate ASTM A694 F65 CARBON STEEL |
25.00 |
Coat | Coating Material | NDFT μm |
1 | Zinc Rich Primer | 70 |
2 | 2-component high build epoxy | 200 |
3 | Polyurethane Topcoat | 50 |
This challenge is more difficult than last time because the size of our flange is too small. Processing is very troublesome. Especially this time, the bolt hole is too small, and the sealing surface needs to be protected from paint. However, we still completed the order very well, and the customer was very satisfied after seeing the picture.