Introduction of flange chamfer

Chamfering,as the name implies,is to pour out the angle,generally 90 degrees into 45 degrees.

Chamfering is a term used in mechanical engineering. For example, when drilling on a board, the hole wall and the board surface are 90 degrees right angle after completion. Chamfering is to make a small plane with an answer of 45 degrees on the 90 degree edge,so that the plane and the inner wall, or between the plane and the board surface, are 45 degrees. The advantage of this is that it is more convenient to insert the East version into the hole without being stuck.

Flange before chamfering

Chamfering in flange refers to flattening the raised flange and chamfering the flange plate, mainly to remove the sharp edges and corners, so as to prevent the sharp edges and corners from hurting people.

Haihao Group manufacture steel pipes fittings and flanges products more than 30 years,the products sells well all over the world for the high quality.If you have any question,please contact us! Email:sales@haihaogroup.com

Flange after chamfering