Haihao Group Ships ASME B16.5 150CL Flanges to Kenya Piping Project

A full set of ASME B16.5 150CL flanges has left Haihao Group’s workshop, ready for delivery to a piping project in Kenya. This order combines multiple flange types and two material grades, tailored to different pipe connection points on the site.

The project team selected ASME B16.5 150CL flanges for most of the pipeline joints, with stainless steel and carbon steel variants to match process fluid requirements. One DN100 slip-on raised face flange uses ASTM A182 F316L stainless steel, ideal for sections exposed to corrosive media. The rest of the ASME B16.5 150CL flanges are manufactured from ASTM A234 GR WPB carbon steel, a common cost-effective choice for general process piping.

ASME B16.5 150CL RF flanges SORF, blind, socket weld and weld neck flanges packed before shipment to Kenya

Order Specification Summary Table

This shipment includes four main flange styles. A DN600 blind flange is used to seal off pipeline ends. DN25 and DN40 socket weld flanges serve smaller branch lines. Weld neck flanges cover larger pipe sizes: DN100, DN400, DN500 and DN600. A DN600 slip-on raised face flange is also included to simplify alignment for big bore pipework. Every piece of these ASME B16.5 150CL flanges adopts raised face sealing surface to deliver reliable gasket performance under 150LB working pressure.

Each flange undergoes dimensional inspection and surface check before packing. Material test certificates are prepared for every heat number, which helps the Kenyan contractor complete third-party inspection and site acceptance smoothly. We separated stainless steel and carbon steel flanges into different crates to avoid cross-contamination during transit, a simple but important detail for overseas piping deliveries.

Sourcing all required ASME B16.5 150CL flanges from one supplier cuts the work of matching sizes, materials and pressure classes across multiple vendors. Our team grouped items by flange type and marked each crate with size, material grade and pressure rating, so the site crew can quickly pick the correct components during installation.

Haihao Group regularly exports ASME B16.5 150CL flanges and other piping components to East Africa. We can mix stainless and carbon steel flange types within one shipment, matching your P&ID or flange list directly.

If you need certified ASME B16.5 flanges for your pipeline project in Kenya or surrounding regions, send your flange schedule over. Our technical team will review your specs and prepare a precise quotation quickly.