ASME B16.48 Spectacle Blind Shipment for Singapore Offshore Topside Project
Haihao Group recently completed and packed a batch of ASME B16.48 spectacle blind and paddle blank assemblies for a Singapore offshore topside package. This order covers mixed material grades, multiple pressure classes and serrated sealing faces, tailored to the project’s strict isolation and documentation requirements for process piping.
The ASME B16.48 spectacle blind range supplied includes carbon steel, low-temperature carbon steel, stainless steel and super duplex variants. The carbon steel selections are ASTM A516 Grade 70 for standard 150# isolation points, while ASTM A350 LF2 CL1 handles low-temperature service at 600# class. Stainless ASTM A240 TP316 spectacle blind is prepared for corrosive process streams, and the high-spec ASTM A240 UNS S32750 super duplex grade is the critical corrosion-resistant option for harsh offshore conditions.

ASME B16.48 spectacle blind, RF serrated finish, A240 S32750 super duplex for offshore topside piping isolation
For the S32750 super duplex spectacle blind, our mill and in-house inspection team carried out a full suite of mandatory tests as specified. The material certificate must show PREN ≥ 40.0, together with ferrite content check, metallographic examination, hardness survey, pitting corrosion test, PMI positive material identification, NDT and low-temperature impact test at -46°C. All these records are bundled into the final documentation pack before shipment.
Every spectacle blind and separate paddle blank / spacer comes with spiral serrated finish, surface roughness controlled between 125 AARH minimum and 250 AARH maximum, either RF or FF face according to the line item sheet. Sizes span NPS 1/2 through NPS 14, pressure classes from 150#, 300# to 600#, all built and dimensionally verified under ASME B16.48 rules.
We do not treat these spectacle blind parts as simple commodity plates. Each line item carries the project tag numbers, drawing references and material traceability links. The full document package includes chemical analysis reports, tensile test records, impact test certificates, hardness reports, PMI sheets, heat treatment documents and NDT reports such as PT and UT. This level of traceability is essential for topside piping sign-off, where inspectors validate every blind before commissioning and shutdown isolation.
Many offshore engineering teams in Singapore and Southeast Asia source spectacle blind with mixed grades in one consolidated order. The ability to coordinate carbon, low temp, stainless and super duplex ASME B16.48 spectacle blind in a single shipment helps clients simplify procurement and reduce vendor coordination work. Haihao keeps strict segregation between material batches and clearly marks each component to avoid mix-up on site.
If you are preparing RFQ for topside line blanks, spectacle blind, paddle blanks or spacer rings with special test requirements, send over your tag list and surface finish specs. We can quote mixed grades, arrange third-party witness inspection and deliver complete MTR packages matching your project data sheet.
